Our LTM 1090 & GR800 tadano working on a tandem lift #vergonacrane #buildingamerica

GR-1000XLL. Our 100t tadano #vergonacrane #buildingamerica

LTM 1450 #vergonacrane #ram #buildingamerica

LTM 1230 #vergonacrane #buildingamerica

LTM 1230 up and over #vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica #liebherr

Our brand-new Liebherr LTM 1090-4.2 making its maiden voyage! Another great addition to the Vergona Crane fleet, ready to get to work!💪🏼 #vergonacrane #liebherr #buildingamerica

Threading the needle💪🏼 Our Liebherr LTM 1150 setting 25,000 lb precast structures with a great customer. #vergonacrane #kp #buildingamerica

Putting serious iron in the air! Setting 100- foot steel beams weighing 31,000 lbs reaching 120’ takes power, precision, and a crew that gets the job done. #vergonacrane #buildingamerica

Removing 75,000lb concrete batch plant mixer #vergonacrane #building #america

Our 888 built and ready to set sail🚢🏙️

Precision #vergonacrane #buildingamerica

LTM 1230. 158k CTW. 15,000 lbs @ 135’ #vergonacrane #buildingamerica #liebherr

Our LTM 1100 takes on the challenge of setting 52,000-pound precast doors inside a warehouse with a 45-foot roof height. Using specialized rigging to keep the overall lift height within the building’s clearance limitations, our team safely and efficiently executes each pick with the precision and expertise our customers expect. #vergonacrane #buildingamerica

LTM 1150🎣🎣🎣 #vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica #liebherr

Beautiful fall day for some Saturday work #vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica

3 Nights. 24 Rooftop Units. Our Liebherr LTM 1300 putting in work over three consecutive nights, removing old rooftop units, setting new curbs, and installing 24 new units. From receiving, storing, and delivering the equipment to coordinating our roof and ground crews, every part of this project required precision and teamwork. With a crane breakdown and relocation each night, our crew kept the operation moving safely and efficiently. Another successful project by the Vergona Crane team! 💪 #VergonaCrane #BuildingAmerica #Liebherr #LTM1300 #NightWork

#vergonacrane #buildingamerica

#vergonacrane #buildingamerica

Setting a 25,000 lb elevator #vergonacrane #buildingamerica

#vergonacrane #buildingamerica

#vergonacrane #buildingamerica

#vergonacrane #buildingamerica🇺🇸

85,000 lb generator being set with our 550 Ton #vergonacrane #buildingamerica #merck #DPR

#vergonacrane #liebherr #buildingamerica

Our 222 setting steel🎄🎄#vergonacrane #buildingamerica

#vergonacrane #buildingamerica

LTM 1450 lifting a 25,000 lb manlift out of a courtyard💪🏼 #VergonaCrane #buildingamerica

Make up units being pieced together using our LTM 1450. #vergonacrane #buildingamerica

Calvary rolling in #vergonacrane #buildingamerica

#vergonacrane #buildingamerica

Four months of planning for a 12-hour window. Our Liebherr LTM 1450 set up overnight on a state roadway with 276’ of luffing jib and 295,000 lbs. of counterweight. We set a new HVAC unit weighing 10,000 lbs @ a 295’ radius. With the clock running, our team got in, built the crane, completed the work, and cleared the roadway — safely, efficiently, and on schedule. A job like this takes more than a big crane. It takes planning, coordination, and a crew that knows how to execute. Proud of everyone from our team. 💪🏼 #vergonacrane #buildingamerica

25 years ago today, our nation endured one of the most horrific tragedies in American history. Thousands of innocent lives were lost, countless families were changed forever, and our country stood together in the face of unimaginable loss. Today, we honor the lives of those we lost, remember the heroes who made the ultimate sacrifice, and pay tribute to the strength and resilience of the American people. May we always remember. May we never forget. God Bless America. 🇺🇸 #NeverForget #September11 #25Years #America #VergonaCrane

LTM 1300 setting 70,000 lb precast beams at a 70’ radius #vergonacrane #earle #buildingamerica

Our LTM 1450 carefully placed a 90,000-pound precast structure setting up between 80-foot-tall power lines having to reach up and over — a lift that demanded precision, planning, and complete attention to safety. From setup to final placement, our team worked cautiously and methodically to get the job done safely and efficiently. When the margins are tight, experience matters. #vergonacrane #buildingamerica #montana

#vergonacrane #buildingamerica

#vergonacrane #buildingamerica

#vergonacrane #buildingamerica

100 ton crawler ready to work💪🏼 #vergonacrane #buildingamerica

LTM 1450 setting precast planks for a new bridge being built #vergonacrane #liebherr #buildingamerica

LTM 1300 setting a 60’000 lb temp skid at a 70’ radius #vergonacrane #buildingamerica

LTM 1150 with 99k of counterweight #vergonacrane #liebherr #buildingamerica

LTM 1450 #vergonacrane #buildingamerica

#vergonacrane #buildingamerica

Setting a pool up and over a house #vergonacrane #buildingamerica #liebherr

LTM 1090 laying out #vergonacrane #buildingamerica #liebherr

Ready to roll #vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica

Our LTM 1230 handling this 25,000 lb concrete slide using two spreader bars, rolling blocks and cables. The rigging allowed us to evenly support the slide while keeping it at the exact angle needed to set it into place. #vergonacrane #buildingamerica

#vergonacrane #liebherr #buildingamerica

Our LTM 1300 with 212k of counterweight setting a 95,000 lb structure #vergonacrane #buildingamerica #liebherr

Our LTM 1230 loaded the structure at the bottom of the substation onto our tri-axle step deck. From there, it was carefully transported up and around the substation to our LTM 1300, where it was picked and set into its final position. #vergonacrane #buildingamerica #liebherr

Our LTM 1230 carefully picked and positioned a 50,000-pound culvert underneath powerlines with tight clearances, precision rigging, and a safety-first approach, our crew executed the lift with control from start to finish. #vergonacrane #buildingamerica

LTM 1300 #vergonacrane #liebherr #buildingamerica

#vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica

LTM 1230 building a playground #vergonacrane #liebherr #buildingamerica

LTM 1090 set up on the field at Steven’s Tech in Hoboken #vergonacrane #liebherr #buildinganerica

LTM 1150 picking 45,000 lb transformer at 50’ #vergonacrane #buildingamerica

LTM 1230 swapping out a 25,000 lb magnet #vergonacrane #liebherr #buildingamerica

#vergonacrane #buildingamerica

#vergonacrane #liebherr #buildingamerica

#vergonacrane #buildingamerica

#vergonacrane #buildingamerica #liebherr

LTM 1450 with 138’ of luffer setting a 44,000 lb generator #vergonacrane #liebherr

Rain or Shine #vergonacrane #buildingamerica #liebherr

LTM 1300 setting steel in NYC #vergonacrane #buildingamerica #liebherr

LTM 1150 working at the Palisades Tunnel Project #vergonacrane #liebherr #buildingamerica

#vergonacrane #liebherr #buildingamerica

#vergonacrane #buildingamerica #liebherr

#vergonacrane #buildingamerica

LTM 1230 & Manitowoc 222 working side by side #vergonacrane #buildingamerica

#vergonacrane #liebherr #buildingamerica

Our GR150 and LTM 1090 working side by side #vergonacrane #buildingamerica

Luffing up 💪 #vergonacrane #buildingamerica #liebherr

250 Years of Freedom. God Bless America 🇺🇸🇺🇸 #vergonacrane #buildingamerica #buildingamerica #usa #4thofjuly

#vergonacrane #liebherr #buildingamerica

Follow along to see us set a two piece manhole with our LTM 1230. The bottom piece weighing 83,000 lbs and the top piece weighing 91,000 lbs. Great job by all the crews. #vergonacrane #buildingamerica #liebherr #jfc #trending

#vergonacrane #buildingamerica

LTM 1300 working on the Garden State Parkway #vergonacrane #jfc #liebherr #buildingamerica

LTM 1450 replacing two new 10,000 lb HVAC units with a radius of 275’ #vergonacrane #buildingamerica

LTM 1060 installing flood gates in Jersey City #vergonacrane #buildingamerica #liebherr

The road to the 2026 FIFA World Cup starts long before the first whistle. From planning and preparation to building the stage for the world’s biggest sporting event, every detail matters. Excited to be part of the journey as we help lay the foundation for an unforgettable tournament. 🌎 🏆 #FIFAWorldCup2026 #RoadTo2026 #WorldCupPrep #Buildingamerica #vergonacrane

LTM 1150 with 99k of counterweight setting bridge beams #vergonacrane #liebherr #buildingamerica

Our 100 ton tadano ready to float up to Rhode Island⛴️🏗️#vergonacrane #buildingamerica

#vergonacrane #buildingamerica

We’re proud to have played a role in the preparation of MetLife Stadium for the 2026 FIFA World Cup. #vergonacrane #buildingamerica

#vergonacrane #liebherr #buildingamerica

Beautiful Sunday swapping out cooling towers. These towers sat on top of a 220’ roof weighing 8,000 lbs. Our LTM 1230 was fully scoped out with 246’ of main and 38’ jib to reach up and over the building to reach the towers. Great job by our team💪 #vergonacrane #liebherr #buildingamerica

Our 550 ton working through the night setting a 50,000 lb pedestrian bridge #vergonacrane #buildingamerica #liebherr

LTM 1230 with 66’ of jib reaching 255’ #vergonacrane #buildingamerica

Lifting a 44,000 lb old military tank for the Knights of Columbus tank pull #vergonacrane #buildingamerica #liebherr #trending #viral

#vergonacrane #liebherr #buildingamerica